# FMod Studio Tutorial for UE 4 Video 3 Mismatch FMod Studio 1 and 2

**URL:** <https://qa.fmod.com/t/fmod-studio-tutorial-for-ue-4-video-3-mismatch-fmod-studio-1-and-2/15628>\
**Category:** FMOD Studio\
**Created:** [April 10, 2020, 12:26pm UTC](https://qa.fmod.com/t/fmod-studio-tutorial-for-ue-4-video-3-mismatch-fmod-studio-1-and-2/15628 "2020-04-10T12:26:20Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![jbfproductions](https://avatars.discourse-cdn.com/v4/letter/j/edb3f5/32.png) [@jbfproductions](https://qa.fmod.com/u/jbfproductions)\
**Post date:** [April 10, 2020, 12:26pm UTC](https://qa.fmod.com/t/fmod-studio-tutorial-for-ue-4-video-3-mismatch-fmod-studio-1-and-2/15628/1 "2020-04-10T12:26:20Z")

</div>

Hi there, trying to wrap my head around the Fmod Studio for UE YouTube Tutorial.  
So this is a **noob** question. This Tutorial is for Version 1 and I decided to go with Version 2.08, which is slightly different. Following the steps of this tutorial I am stuck at

  
The tutor scopes in the “environmenet/ambience” to the “Twister Mix” snapshot. This “environmenet/ambience” event is already routed into the Env Group.  
However I am not able to replicate the steps because there is no “scope in” in the right click menue for “environmenet/ambience” event.  
 ![grafik](https://canada1.discourse-cdn.com/flex036/uploads/fmod/original/2X/c/c5d679456c3363a65a2522ca8866567c2b02382c.png)

“Scope In” is available only for Groups.

Please help.

On the same note I strongly recommend to update the tutorials for Version 2 or at least add some subtitles, pointing out the differences between V1 and V 2.

---

<div class="post-metadata">

**Author:** ![richard\_simms](https://yyz2.discourse-cdn.com/flex036/user_avatar/qa.fmod.com/richard_simms/32/261_2.png) [@richard\_simms](https://qa.fmod.com/u/richard_simms)\
**Post date:** [April 16, 2020, 6:13am UTC](https://qa.fmod.com/t/fmod-studio-tutorial-for-ue-4-video-3-mismatch-fmod-studio-1-and-2/15628/2 "2020-04-16T06:13:35Z")

</div>

You can’t scope event buses into a snapshot, only group and return buses. For this part of the tutorial, please create a group bus and route the event into this bus.

We are looking into updating tutorials and/or replacing them in future releases. Thank you for the feedback.