# Looping problems with ASDR **URL:** \ **Category:** FMOD Studio\ **Created:** [May 21, 2024, 6:26pm UTC](https://qa.fmod.com/t/looping-problems-with-asdr/21645 "2024-05-21T18:26:56Z")\ **Posts on this page:** 1\ **Showing post:** 4
**Author:** ![verde.lima](https://avatars.discourse-cdn.com/v4/letter/v/c89c15/32.png) [@verde.lima](https://qa.fmod.com/u/verde.lima)\ **Post date:** [August 24, 2025, 6:55pm UTC](https://qa.fmod.com/t/looping-problems-with-asdr/21645/4 "2025-08-24T18:55:07Z")
Hi! Found a workaround to this problem: > [@AHDSR probem on volume with Loop region and release](https://qa.fmod.com/t/ahdsr-probem-on-volume-with-loop-region-and-release/13833/4): > > Hi there! I have been fighting against this same problem for hours and finally found a solution. In my case I needed the 6 tracks inside the main music event to run in sync and loop, but fade in or out depending on a discrete parameter value. Since AHDSR in clips nor tracks was working the way I needed, I created one send channel in the mixer window for each track (6 in total), assigned those tracks (pre-fader) to the sends (-inf volum in the event page), [1] > [@AHDSR probem on volume with Loop region and release](https://qa.fmod.com/t/ahdsr-probem-on-volume-with-loop-region-and-release/13833/5): > > And created a snapshot for each layer combination I needed. Then added AHDSR mod to the Intensity knob of each snap (this way you can control attack and release time). [2] --- _[View the full topic](https://qa.fmod.com/t/looping-problems-with-asdr/21645)._