# Scatterer and Transceiver Plugin

**URL:** <https://qa.fmod.com/t/scatterer-and-transceiver-plugin/14970>\
**Category:** FMOD Studio\
**Created:** [August 21, 2019, 9:58am UTC](https://qa.fmod.com/t/scatterer-and-transceiver-plugin/14970 "2019-08-21T09:58:43Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![jdmoore](https://yyz2.discourse-cdn.com/flex036/user_avatar/qa.fmod.com/jdmoore/32/510_2.png) [@jdmoore](https://qa.fmod.com/u/jdmoore)\
**Post date:** [August 21, 2019, 9:58am UTC](https://qa.fmod.com/t/scatterer-and-transceiver-plugin/14970/1 "2019-08-21T09:58:43Z")

</div>

It seems the spatialisation of Events that use a scatter is lost once the signal had passed through the transceiver plugin. Is there any way to maintain the spatial properties?

Thanks

---

<div class="post-metadata">

**Author:** ![jdmoore](https://yyz2.discourse-cdn.com/flex036/user_avatar/qa.fmod.com/jdmoore/32/510_2.png) [@jdmoore](https://qa.fmod.com/u/jdmoore)\
**Post date:** [August 21, 2019, 12:03pm UTC](https://qa.fmod.com/t/scatterer-and-transceiver-plugin/14970/2 "2019-08-21T12:03:59Z")

</div>

Managed to resolve this - It was simple. All I needed to do was change the channel input on the 'receiver Event to stereo (right click on meter). Seems to default to mono for some reason.

---

<div class="post-metadata">

**Author:** ![richard\_simms](https://yyz2.discourse-cdn.com/flex036/user_avatar/qa.fmod.com/richard_simms/32/261_2.png) [@richard\_simms](https://qa.fmod.com/u/richard_simms)\
**Post date:** [August 23, 2019, 3:52am UTC](https://qa.fmod.com/t/scatterer-and-transceiver-plugin/14970/3 "2019-08-23T03:52:44Z")

</div>

Yes, the transceiver does not force output to a certain channel count when set to receiver mode. I’ve added a note to our tracker to look into this for a future release, thanks for bringing it to our attention.